Table of Contents
Advertisement
<Menu>
<Function Settings>
Compensation>
*1
<BarDIMM>
This setting enables you to print bar codes supported by the Barcode Printing Kit. If <Enable> is selected, the
machine will generate bar codes when it receives bar code commands from the host computer. If <Disable>
is selected, bar codes will not be generated, even if bar code commands are sent from the host computer.
<Disable>
<Enable>
<Menu>
<Function Settings>
<Disable> or <Enable>
●
To enable the BarDIMM menu, it is necessary to activate the Barcode Printing Kit. When you are not
printing bar codes, make sure to disable the BarDIMM menu. Otherwise, the processing speed of regular
print jobs may be reduced.
●
The default setting is <Disable>. If you activate the Barcode Printing Kit, it changes to <Enable>.
*1
<FreeScape>
Specify the AEC (Alternate Escape Code) to be used for bar code commands when the host computer does
not support the standard Escape Code.
<Off>
<~>
<">
<#>
<$>
</>
<\>
<?>
<{>
<}>
<|>
<Menu>
<Function Settings>
an escape code
●
This setting is available only when <BarDIMM> is enabled.
Setting Menu List
<Printer>
Select the type of image
<Printer>
<Printer>
537
<Printer Settings>
<PCL>
Select <Off> or <On>
<Printer Settings>
<PCL>
<Printer Settings>
<PCL>
<Gray
<BarDIMM>
Select
<FreeScape>
Select
- Quick Links:
- Setting up
Hide quick links:
Advertisement
Table of Contents
