Canon imageCLASS MF746Cdw User Manual page 161

● When loading envelopes or paper with a logo, see
Paper(P. 159) .
5
Align the paper guides against the edges of the paper.
● Slide the paper guides inward until they are aligned securely against the edges of the paper.
Align the paper guides securely against the edges of the paper
● Paper guides that are too loose or too tight can cause misfeeds or paper jams.
»
Continue to
Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)
● You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the
paper drawer ( Loading Paper in the Paper Drawer(P. 145) ) or multi-purpose tray, with the side to print
face up (previously printed side face down).
- When using the multi-purpose tray, load one sheet of paper each time you print.
- You can use only the paper printed with this machine.
- You cannot print on the side that has previously been printed on.
- If the printouts look faded, set the target paper source to <On> in <Manual Back Side Print (2-Sided Only)>.
<Manual Back Side Print (2-Sided Only)>(P. 491)
- If you are using A5 size paper, the reverse side may not be printed correctly.
For MF644Cdw / MF642Cdw / MF641Cw
Make sure to insert the paper drawer
● The machine only prints when the paper drawer is inserted, even if paper is loaded in the manual feed slot.
An error message is displayed if you attempt to print without inserting the paper drawer.
Load only one sheet of paper at a time
● Only one sheet of paper can be loaded each time you print.
Basic Operations
Specifying Paper Size and Type in the Multi-Purpose Tray(P. 164)
Loading Envelopes(P. 156) or
153
Loading Preprinted