Receiving Faxes - Canon imageCLASS MF746Cdw User Manual

Receiving Faxes

This section describes the methods for receiving faxes and how to set up the machine to receive faxes. You need to
complete some procedures for using fax functions before specifying the receiving settings.
Settings for Fax Functions(P. 80)
● The machine can print received fax documents on A4 or Letter size paper. If received fax documents are
printed on other paper sizes, a portion of the page may not be printed or a page may be printed on two
separate sheets of paper.
◼
Methods for Receiving Faxes
The machine provides the following receiving methods. Select the method that best suits your needs and then set it up
by following the procedure in
<Auto>
Dedicated to receiving faxes
The machine receives faxes automatically. Even if someone makes a call to you, you cannot talk
to the caller.
When the call is a fax
The machine receives the fax automatically.
<Fax/Tel (Auto
Switch)>
When the call is a telephone call
An incoming call rings. Pick up the handset to answer the call.
●
When the call is a fax
An incoming call rings. Pick up the handset. If you hear a beep, select
Receiving> to receive faxes.
<Manual>
When the call is a telephone call
An incoming call rings. Pick up the handset and start your conversation.
●
Setting Up the Machine to Receive Faxes(P. 233) .
You need to connect your telephone to the machine beforehand.
You need to connect your telephone to the machine beforehand.
Faxing
232
3S1Y-04J
Configuring Initial
<Fax> <Start