Specifying Ip Addresses For Firewall Settings - Canon imageCLASS MF746Cdw User Manual

Specifying IP Addresses for Firewall Settings

You can either limit communication to only devices with specified IP addresses, or block devices with specified IP
addresses but permit other communications. You can specify a single IP address or a range of IP addresses.
● For more information about the basic operations to be performed when setting the machine from the
Remote UI, see Setting Up Menu Options from Remote UI(P. 438) .
1
Start the Remote UI and log in to System Manager Mode.
UI(P. 428)
2
Click [Settings/Registration] on the Portal page.
3
Select [Network Settings]
4
Click [Edit] for the target IP address filter.
● Select the filter that matches the target IP address. To restrict data sent from the machine to a computer,
select [Outbound Filter]. To restrict data received from a computer, select [Inbound Filter].
5
Specify the settings for packet filtering.
● Select the default policy to allow or reject the communication of other devices with the machine, and then
specify IP addresses for exceptions.
Managing the Machine
[Firewall Settings].
380
Starting Remote
Remote UI Screen(P. 429)
3S1Y-076