Grandstream Networks GRP261 Series Administration Manual page 91

Register_Status
Bootup_Complete
The dynamic
attributes in this row
are common
attributes that can be
applied to all events
All above dynamic attributes' value is generated by the phone system and can be used as dynamic attributes with a pair of
curved braces around them. For example, if the message body is specified as follows:
Your call from {remoteName}:{remoteNumber} to {localName}:{localNumber} was forwarded to {fwdNumber} by reason
{fwdReason}.
Then the message received in the outbound notification will look like this:
Your call from Daniel:2070 to Jasmine:2071 was forwarded to 777777 by reason unconditional.
Only attributes in curved braces will be replaced by the run-time value. Other content will remain the same as static text.
For each event, at most 3 notifications can be configured. In total, up to 75 notifications can be configured. The P-value for
each notification is listed in the below table.
P Value Notification
account
remoteNumber
remoteName
localNumber
localName
sipServer
call-id
Time
transferName
transferNumber
registerStatus
N/A
mac
phone_ip
program_version
hardware_version
product
language
Table 23: Action URL – Events and Dynamic Attributes
Account number associated with the call
The remote party number
The remote party name
The local party number
The local party name
The SIP server address of the account
The SIP dialog call ID
The time stamp when the call is transferred
Transferred party name
Transferred party number
Account register status. The value can be "registered" or
"unregistered"
N/A
MAC address of the phone
IP address of the phone
Software version of the phone
Hardware version of the phone
Product name of the phone
Display language on the phone
Value Format