Grandstream Networks GRP261 Series Administration Manual page 74

Delete Users can select an entry, then click "Delete" to remove it from the list.
Click on Delete All to remove all Call History stored in the phone.
Delete All
Note: Users could use the drop-down list to show only selected call history type (All, Answered,
Dialed, Missed, and Transferred) and use navigation keys to browse pages when many entries exist.
External Service Page Definitions
GDS
Call Center Codes
Authentication Login
Server
Port
XSI Action Path
XSI Authentication Type
Application �� Call History
Table 17: Application Page Definitions
External Service �� GDS
Connect to a GDS37XX and send OpenDoor request.
● Service Type: Select GDS as service type.
● Account: The account to be used on the phone to interact with the GDS37XX.
● System Identification: A name or a number to identify the GDS37XX.
● System Number: The SIP extension or the IP address of the GDS37XX depending
on the deployed scenario, Peering or Registration.
● Access Password: The password set on the GDS37XX to unlock the door.
● System Ringtone: Select the system ringtone from the dropdown list to be played
when there is an incoming call from the configured system number of the
GDS37xx.
Notes:
● When using Peering scenario, on "System Number" field of the GRP260x specify
the IP address of the peered GDS37XX.
● When using Registration scenario and both GRP260x and GDS37XX are
registered on the same SIP server, specify the SIP extension of the GDS37XX on
"System Number" field on GXP16XX.
The "Access Password" on GRP260x should be matching "Remote PIN to Open the
door" on GDS37XX.
External Service �� Call Center
Set the disposition code and the unavailable code for quick selection on the phone
side.
External Service �� Broadsoft XSI
Broadsoft XSI server address with protocol.
Port of the Broadsoft XSI server.
Configure the deployment path for Broadsoft XSI Actions. If it is empty, the path
"com.broadsoft.xsi-actions" will be used.
Defines the authentication type to use login credentials or SIP credentials. If set to
"Login Credentials", please fill in User ID and Password in the following options; If