Grandstream Networks GRP261 Series Administration Manual page 52

Port
Community
SNMP Trap Version
SNMP Trap IP
SNMP Trap port
SNMP Trap Interval
SNMP Trap Community
SNMP Username
Security Level
Authentication Protocol
Privacy ProtocolNone
Authentication Key
Privacy Key
SNMP Trap Username
Trap Security Level
Trap Authentication Protocol
Trap Privacy Protocol
SNMP port. The valid range is 161, 1025-65535.
The default value is "161".
SNMP Community.
Choose the Trap version of the SNMP trap receiver.
● Trap Version 1
● Trap Version 2
● Trap Version 3
The default is "Trap Version 2".
IP address of trap destination.
Port of the SNMP trap receiver. The valid range is 162, 1025-65535. The default
value is "162".
The interval between each trap sent to the trap receiver. The valid range is 1 –
1440.The default value is "5"
Community string associated to the trap. It must match the community string of the
trap receiver.
Username for SNMPv3
● noAuthUser: Users with security level noAuthnoPriv and context name as noAuth.
● authUser: Users with security level authNoPriv and context name as auth.
● privUser: Users with security level authPriv and context name as priv.
Select the Authentication Protocol:
● None
● MD5
● SHA
The default setting is "None".
Select the Privacy Protocol:
● None
● DES
● AES
Enter the Authentication Key.
Enter the Privacy Key.
Username for SNMPv3 Trap.
noAuthUser: Users with security level noAuthnoPriv and context name as noAuth.
authUser: Users with security level authNoPriv and context name as auth.
privUser: Users with security level authPriv and context name as priv.
Select the Authentication Protocol: "None" or "MD5" or "SHA".
The default setting is "None".
Select the Privacy Protocol: "None" or "AES/AES128" or "DES".
The default setting is "None".