Grandstream Networks GRP261 Series Administration Manual page 18

Phone
System
● Ring Tone: Configures different ring tones for incoming call.
● Ring Volume: Adjusts ring volume by pressing left/right arrow key
– Appearance:
● Active LCD Brightness: Adjusts active LCD brightness by pressing left/right arrow
key.
● Idle LCD Brightness: Adjusts idle LCD brightness by pressing left/right arrow key.
● Active LCD Timeout: Adjusts the minute of active backlight timeout.
● Screensaver: Enables/Disables Screensaver.
● Screensaver Timeout: Configures the minutesof idle before the screensaver
activates. Valid range is 3 to 60.
– MPK LCD Settings (Available on GRP2614/GRP2616 only):
● MPK LCD Display Order: Choose MPK LCD Display Order whether to be
Sequential or Alternating
● Display Contact on MPK LCD: Enable / Disable Display Contact on MPK Order
– Language and Input:
● Display Language: Selects the language to be displayed on the phone's LCD.
Users could select Automatic for local language based on IP location if
available. By default, it is Auto.
● Default Input Selection: Selects the Input mode from Multi-Tap and Shiftable. By
default, it is Multi-Tap. — Multi-Tap: User may tap the same key multiple times to
switch to the desired character. —Shiftable: After pressing the number button,
user will see the IDs of the characters that matching to the button. User can
select the desired character by entering the corresponding ID on keypad.
– Date Time:
● Allow DHCP Option 42 to override NTP server
● Allow DHCP Option 2 to override NTP server
● Time Settings
It is used to configure date and time on the phone.
– Search Mode:
Specifies the phonebook search mode to QuickMatch or ExactMatch. By default, it is
QuickMatch.
Phone sub menu includes the following options:
● SIP: Configures SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID, SIP
Password, SIP Transport and Audio information to register SIP account on the
phone.
● Call Features:Configures call forward features for Forward All, Forward Busy,
Forward No Answer and No Answer Timeout.
System sub menu includes the following options:
– Network:
● Internet Protocol :Selects Prefer IPv4 / Prefer IPv6 / IPv4 only or IPv6 only. The
default setting is "Prefer IPv4".
● IP Setting: Selects IP mode (DHCP/Static IP/PPPoE); Configures PPPoE account
ID and password; Configures static IP address, Netmask, Gateway, DNS Server 1
and DNS Server 2.
● 802.1X: Enables/Disables 802.1X mode; Configures 802.1x identity and MD5
password.
● Layer 2 QoS: Configures 802.1Q/VLAN Tag and priority value. Select "Reset
VLAN Config" to reset VLAN configuration.
– Wi-Fi Settings (GRP2612W, GRP2614, GRP2615, GRP2616, GRP2624, GRP2634,
GRP2670 & GRP2650 only):
● Enables/disables Wi-Fi: Enables/disables Wi-Fi
● Scan: Enables/disables Wi-Fi
– Bluetooth Settings (GRP2614/GRP2615, GRP2616, GRP2624, GRP2634, GRP2670
& GRP2650 only):
● Bluetooth Status: Displays the status of Bluetooth