Grandstream Networks GRP261 Series Administration Manual page 68

Syslog Keyword Syslog will be filtered based on keywords provided. If you enter multiple keywords, it should be
Filter separated by ','. Please note that no spaces are allowed.
Configures whether the SIP log will be included in the syslog messages. The default setting is "No".
Send SIP Log
Note: By setting Send SIP Log to Yes, the phone will still send SIP log from syslog even when Syslog
Level set to NONE.
Packet Capture
With RTP Packets Defines whether the packet capture file contains RTP or not. The default setting is "No".
Ping
Ping Enter Ping target's IP address or URL and click on start.
Traceroute
Traceroute Input target's IP address or URL and click on start
Action URL
Phone Status
Setup Completed Configures the Action URL to send when phone finishes setup process.
Registered Configures the Action URL to send when phone successfully registers a SIP account.
Unregistered Configures the Action URL to send when phone unregisters a SIP account.
Call Operation
Off-hook Configures the Action URL to send when phone is in off-hook state.
On-hook Configures the Action URL to send when phone is in on-hook state.
Incoming Calls Configures the Action URL to send when phone receives an incoming call.
Outgoing Calls Configures the Action URL to send when phone places a call.
Missed Call Configures the Action URL to send when phone has a missed call.
Established Call Configures the Action URL to send when phone establishes a call.
Terminated Call Configures the Action URL to send when phone terminates a call.
Blind Transfer Configures the Action URL to send when phone performs Blind Transfer.
Attended Transfer Configures the Action URL to send when phone performs Attended Transfer.
Hold Call Configures the Action URL to send when phone places a call on hold.
Maintenance �� Outbound Notification