Grandstream Networks GRP261 Series Administration Manual page 24

Current Hours
Energy Saving Mode
Idle Time Tracking
Backlight Brightness:
Active
Active Backlight
Timeout
Blank Screen Timeout
Enable Missed Call
Backlight
Enable IEEE 802.3az
EEE (Energy Efficient
Ethernet)
Enable Live Keypad
Account Page Definitions
Account x �� General Settings
Account Register
Account Active
Account Name
SIP Server
Secondary SIP Server
Tertiary SIP Server
● Forward All
● Busy Forward
● Delay Forward
Status �� Energy Saving
Displays wether it is Office Hours or Non-Office Hours configuration.
Displays the Energy Saving mode.
Displays Energy Saving Feedback for achieved energy savings. By showing the duration that the
phone has been powered up.
Status �� Energy Saving �� Applied Energy Saving Config
Configures the LCD brightness when the phone is active. Valid range is 10 to 100 where 100 is the
brightest.
Configures active backlight timeout (in minutes). The valid range is 0 to 90.
Displays The actual applied power saving timeout value under Standard, Maximum, or
Customized Mode
If set to "Yes", LCD backlight will be turned on when there is a missed call on the phone.
Configures whether to enable IEEE 802.3az Energy Efficient Ethernet.
If enabled, phone will automatically dial out and turn on hands-free mode when keypad or softkey
is pressed.
Table 12: Status Page Definitions
Indicates whether the account is active.
The default setting is "No".
The name associated with each account to be displayed on the LCD. (e.g.,
MyCompany)
The URL or IP address, and port of the SIP server. This is provided by your
VoIP service provider (e.g., sip.mycompany.com, or IP address)
The URL or IP address, and port of the SIP server. This will be used when the
primary SIP server fails
The URL or IP address, and port of the SIP server. This will be used when the