Grandstream Networks GRP261 Series Administration Manual page 76

Server
Port
Username
Password
IM&P Settings
BroadSoft IM&P
Associated BroadSoft Account
Auto Login
Display Non-XMPP Contacts
Enable E911
HELD Protocol
Configure HELD transfer protocol
Location Server
Location Server Username
Location Server Password
Secondary Location Server
Secondary Location Server
Username
Secondary Location Server
Password
HELD Location Types
HELD Use LLDP Information
HELD NAI
E911 Emergency Numbers
Configures BroadSoft IM&P server address. Usually it's not necessary to configure
and it can already be found in the BroadSoft IM&P username.
Configures port for the BroadSoft IM&P server. Default Port is 5222.
Configures BroadSoft IM&P username. This is not the BroadSoft account username.
Configures BroadSoft IM&P username. This is not the BroadSoft account username.
Configures to enable BroadSoft Instant Message and Presence Feature.
Configures the BroadSoft account to dial out with. IM&P contacts can be selected to
dial out with if they have an extension number entry.
Configures whether or not to log in BroadSoft IM&P account at bootup.
Configures whether or not to display non-XMPP contacts associated with the
BroadSoft IM&P user. Non-XMPP contacts will not display presence or status
message.
External Service �� E911 Service
Enable Enhanced 911 call. Default is disabled
Configure HELD transfer protocol. HTTP or HTTPS
The valid synchronization interval is between 30 to 1440 minutes. The
synchronization is off when the interval is 0.
Configure the primary Location Information Server (LIS) address
Configure the user name of the primary Location Information Server (LIS)
Configure the password of the primary Location Information Server (LIS)
Configure the seconary Location Information Server (LIS) address
Configure the user name of the secondary Location Information Server (LIS)
Configure the password of the secondary Location Information Server (LIS)
Configure "locationType" element in the location request. "geodetic", "civic" and
"location URI"
If "Yes", the information from LLDP-suport switch is used to generate ChassisID and
PortID; otherwaise, the mac address of gateway and phone is used as default.
If "Yes", Network Access Identifier (NAI) is included as a device identity in the
location request sent to the Location Information Server (LIS)
A user can configure multiple emergency numbers separated with the delimiter
symbol ";".