Grandstream Networks GRP261 Series Administration Manual page 38

Hoteling Event
Call Center Status
Broadsoft Executive Assistant
Broadsoft Call Park
BLF (Busy Lamp Field)
Presence Eventlist URI
Eventlist BLF URI
Auto Provision Eventlist BLFs
BLF Call-pickup
BLF Call-pickup Prefix
Broadsoft Hoteling event feature. Default setting is "Disabled". With "Hoteling
Event" enabled, user can access the Hoteling feature option by pressing the
"BSCCenter" softkey.
Note: To activate this feature, users need to change the special feature to
Broadsoft and setup the Broadsoft Call Center to take effect.
When set to "Yes", the phone will send SUBSCRIBE to the server to obtain call
center status. The default setting is "Disabled".
Note: To activate this feature, users need to change the special feature to
Broadsoft and setup the Broadsoft Call Center to take effect.
When enabled, Feature Key Synchronization will be enabled regardless of web
settings.
Note: To activate this feature, users need to change the special feature to
Broadsoft and setup the Broadsoft Call Center to take effect.
When enabled, it will send SUBSCRIBE to Broadsoft server to obtain Call Park
notifications. The default setting is "Disabled".
Note: To activate this feature, users need to change the special feature to
Broadsoft and setup the Broadsoft Call Center to take effect.
Configures Presence Eventlist URI to monitor the extensions on Multi-Purpose
Keys.
If the server supports this feature, users need to configure a Presence
Eventlist URI on the service side first (i.e., presence@myserver.com) with a list
of extensions included. On the phone, in this "Presence Eventlist URI" field, fill
in the URI without the domain (i.e., presence). To monitor the extensions in the
list, under Web GUI��Settings��Programmable Keys page, please select
"Presence Watcher" in the key mode, choose account, enter the value of each
extension in the list.
Configures the Eventlist BLF URI on the phone to monitor the extensions in the
list with Multi-Purpose Key. If the server supports this feature, users need to
configure an Eventlist BLF URI on the service side first (i.e.,
BLF1006@myserver.com) with a list of extensions included. On the phone, in
this "Eventlist BLF URI" field, fill in the URI without the domain (i.e., BLF1006).
To monitor the extensions in the list, under Web
GUI��Settings��Programmable Keys page, please select "Eventlist BLF" in the
key mode, choose account, enter the value of each extension in the list.
When option is enabled, empty multi-purpose keys will be automatically
provisioned to the monitored extensions in the "Eventlist BLF" or "Presence
Eventlist".
● Disabled
● BLF Eventlist
● Presence Eventlist
The default setting is "Disabled".
Configures BLF Call-pickup method:
● Auto: The phone will do either Prefix or barge in code for BLF pickup
depend on which on is set.
● Force BLF Call-pickup by prefix: The phone will only use Prefix as BLF
pickup method.
● Disabled: The phone will ignore both BLF pickup method, now the
monitored VPK will only dial the extension if pressed.
The default setting is "Auto".
Configures the prefix prepended to the BLF extension when the phone picks