Grandstream Networks GRP261 Series Administration Manual page 62

Light
Flash
BLF
LED
Pattern
Contains a detailed explanation of the different LED Patterns available. and their light-flashing reaction.
Explana
tion
Form
Audio Control
Headset
When the headset is connected to the phone, users could use the HEADSET button in "Default Mode" or "Toggle
Headset/Speaker".
Default Mode:
● When the phone is in idle, press HEADSET button to off hook the phone and make calls by using headset.
Headset icon will display on the screen in dialing/talking status.
● When there is an incoming call, press HEADSET button to pick up the call-using headset.
Headse
● When there is an active call using headset, press HEADSET button to hang up the call.
t Key
● When Speaker/Handset is being used in dialing/talking status, press HEADSET button to switch to headset.
Mode
Press it again to hang up the call. Or, press speaker/Handset to switch back to the previous mode.
Toggle Headset/Speaker:
● When the phone is in idle, press HEADSET button to switch to Headset mode. The headset icon will display on
the left side of the screen
● In this mode, if pressing Speaker button or Line key to off hook the phone, headset will be used.
● When there is an active call, press HEADSET button to toggle between Headset and Speaker.
Headse
Selects a normal RJ9 headset, Plantronics EHS headset, Jabra EHS, or Sennheiser EHS for the headset type.
t Type
Always
Ring
Configured to enable/disable the speaker to ring when the headset is used on "Toggle Headset/Speaker" mode.
Speake
r
Group
Listen
with In a call, the phone will display a soft key to enable speaker listening when the audio mode handset or headset.
Speake
r
EHS
Headse
t Select EHS headset ringtone.
Rington
e
Headse
Configures the transmission gain of the headset.
t TX
Gain The default value is 0dB.
(dB)
Headse
Configures the receiving gain of the headset.
t RX
Gain The default value is 0dB.
(dB)