Grandstream Networks GRP261 Series Administration Manual page 45

Attended Transfer Mode
DND
Enable DND Feature
Return Code When Enable DND
DND Override
Conference
Enable Conference
BLF
Enable BLF Pickup Screen
Enable BLF Pickup Sound
BLF Pickup Sound Except List
Hide BLF Remote Status
If set to "Static", attended transfers can only be performed with pre-established
calls. If set to "Dynamic", attended transfers can be performed with pre-established
calls OR be initiated during the transfer process. This option does not affect the
user's ability to perform blind transfers.
The default setting is "Dynamic".
For more details about "Static" / "Dynamic" transfer, refer to the user guide.
If set to "No", the user cannot turn on Do Not Disturb feature via MUTE key, MPK, or
menu on LCD.
The default setting is "Yes".
When DND is enabled, the phone will send the selected type of SIP message.
Available options are:
● Busy (486).
● Temporarily Unavailable (480).
● Not found (404).
● Decline (603).
Default setting is "Temporarily Unavailable (480)".
Allows the phone to accept certain incoming calls while set to DND mode.
● Off: all incoming calls will not be accepted.
● Allow all: all incoming calls will be allowed.
● Allow Only Contacts: only incoming calls from numbers in the local phonebook
will be accepted.
● Allow Only Favorites: only incoming calls from favorite numbers in the local
phonebook will be accepted.
The default setting is "Off".
Enables the Conference feature. The default setting is "Yes".
By enabling BLF Pickup Screen, when monitored BLF is ringing,
GRP261x/GRP2624/GRP2634/GRP2670/GRP2650 will pop up a BLF information
window.
The default setting is "No".
Gives the user the ability to set sound notification to the monitoring BLF line when
it's ringing, GRP261x/GRP2624/GRP2634/GRP2670/GRP2650 will play a sound to
inform user.
The default setting is "No".
Configures the list to be playing BLF sound notification for "All Except" extensions in
the list [BLF Pickup Sound Except List] or "Only Allow" extensions in the list [BLF
Pickup Sound Only List].
The default setting is "Allow Except".
Allows users to hide the Caller ID from showing at the BLF VPK and MPK.
● No: The VPK will flash between the Caller ID and the BLF account.
● Yes: The VPK will stay under the monitored account and only notify that there is
an incoming call.
The default setting is "No".