Grandstream Networks GRP261 Series Administration Manual page 32

SRTP Key Length
Crypto Life Time
Enable RTCP
VQ RTCP-XR Collector Name
VQ RTCP-XR Collector Address
VQ RTCP-XR Collector Port
Symmetric RTP
Account x �� Call Settings
General
Key As Send
No Key Entry Timeout
Send Anonymous
Anonymous Call Rejection
Enable Call Waiting
RFC2543 Hold
Ring Timeout
Call Log
Allows users to specify the length of the SRTP calls. Available options are:
● AES 128&256 bit
● AES 128 bit
● AES 256 bit
Default setting is: AES 128&256 bit
Enable or disable the crypto life time when using SRTP. If users set to disable
this option, phone does not add the crypto life time to SRTP header.
The default setting is "Yes".
Enables user to select to use RTCP, RTCP-XR, or disable the feature.
Configures the host name of the central report collector that accepts voice
quality reports contained in SIP PUBLISH messages.
Configures the IP address of the central report collector that accepts voice
quality reports contained in SIP PUBLISH messages.
Configure the port of the central report collector that accepts voice quality
reports contained in SIP PUBLISH messages. Default is "5060".
Defines whether symmetric RTP is supported or not.
Default setting is "No".
Defines the timeout (in seconds) for no key entry. If no key is pressed after the
timeout, the digits will be sent out. The default value is 4 seconds.
The default setting is "Pound (#)".
Configures the timeout (in seconds) for no key entry. If no key is pressed after
the timeout, the collected digits will be sent out. The default setting is 4.
If set to "Yes", the "From" header in outgoing INVITE messages will be set to
anonymous, blocking the Caller ID to be displayed.
Default is "No".
If set to "Yes", anonymous calls will be rejected.
The default setting is "No".
Enables / disables the call waiting feature for the current account. When set to
"Default", global call feature setting will be used.
Default value is "Default".
Allows users to toggle between RFC2543 hold and RFC3261 hold. RFC2543
hold (0.0.0.0) allows user to disable the hold music sent to the other side.
RFC3261 (a line) will play the hold music to the other side.
The default setting is "No".
Defines the timeout (in seconds) for the rings on no answer. The default
setting is 60.
The valid range is from 10 to 300.
Configures Call Log setting on the phone.
● Log All Calls