Grandstream Networks GRP261 Series Administration Manual page 54

Custom Softkey Layout
Custom Call Screen Softkey Layout
Enforce Softkey Layout Position
Custom Softkey (0/3)
Add Custom Softkey
Custom Softkey Layout
Programmable Keys �� Extension Boards Keys (GRP2615 & GRP2650 only)
Extension (1-4) Keys
Auto Provision List Starting Point
More Softkey Display Mode
Menu
Allow Programmable Key
Configuration via LCD.
● Value ( User ID ) : Account on which the action will be performed
Displays the Custom softkey layout, and gives the option to enable softkeys from
the available ones, the maximum number of softkeys differs from one model to
another.
Programmable Keys �� Extension Boards Keys
Enables/disables custom softkey layout.
Disabled by default.
Configures whether to enforce custom softkey layout position.
When enabled, GUI will still preserve the space if the configured softkey is unable to
show.
Disabled by Default.
3 soft keys can be customized to be optional function keys in the Idle screen.
To add the softkey, configure the following :
● Key Mode : Speed dial , DTMF...
● Label : customized label
● Value ( User ID ): The account on which the action will be performed
Configures the Call Status Layout, based on each call status, the enabled softkeys
can be picked from the available ones.
Up to 4 function softkeys can be displayed at one time. If there are more than 4
softkeys, you can switch the display by pressing the page switch softkey. If there is
an "account switch" softkey, it will be displayed first followed by the configured
function keys in sequence.
EXT (1-160):
● Order: Displays the order of Extension keys Configured.
● Mode: Displays the order of Extension keys Configured.
● Account: Sets the account on which the Extension key will be configured.
● Value : Sets the extension of the account chosen.
● Label : Sets a customized name for the specific action chosen.
Programmable Keys �� Advanced Settings
Configures the type of keys that will be used first on the Auto Provision Eventlist BLF
feature. It can be set to either VPK or Extension Boards.
Set to VPK by Default.
Configures how to display more softkey options. It can be set to either Menu or
Toggle.
Set to Menu by Default.
Enables/disables Programmable Key configuration via LCD by pressing and holding
MPKs/VPKs.
Enabled by Default.