Grandstream Networks GRP261 Series Administration Manual page 50

PC Port Priority Value
Enable CDP
Enable LLDP
LLDP TX Interval
Maximum Transmission Unit (MTU)
Network �� Remote Control
Action URI Support
Remote control Pop up window
support
Action URI allowed IP list
CSTA Control
Network �� Affinity Settings (GRP2614, GRP2615, GRP2616, GRP2624, GRP2634, GRP2670 & GRP2670 only)
Affinity Support
Preferred Account
Network �� Bluetooth Settings (GRP2614, GRP2615, GRP2616, GRP2624, GRP2634, GRP2670 & GRP2670 only)
Bluetooth Power
Handsfree Mode
Bluetooth Name
OpenVPN® Enable
Assigns the priority value of the PC port. The valid range is 0 – 7.
The default value is 0.
Enables/Disables CDP "Cisco Discovery Protocol".
The default setting is "Enabled".
Controls the LLDP (Link Layer Discovery Protocol) service.
The default setting is "Enabled".
Defines LLDP TX Interval (in seconds). Valid range is 1 to 3600.
The default setting is "60".
Defines the MTU in bytes. The valid range is 576 – 1500.
The default value is 1500 bytes.
Enables/disables action URI feature on the phone.
The default setting is "Enabled".
Indicates whether the phone is enabled to pop up allow remote control.
The default setting is "Enabled".
List of allowed IP address from which the phone receives action URI. The Allowed IP
addresses are separated by a comma such as "192.168.1.1,192.168.1.2". Set this
field to "any" to allow any IP address to send Action URL to the phone. The default
value is empty string which means no IP address is allowed for remotely control the
phone.
Indicates whether CSTA Control feature is enabled. Change of this configuration will
need the system to reboot to take effect. The default setting is "Disabled".
Allows communication with GS Affinity CTI application to manage telephone calls
from computer. If enabled, a reboot is required to establish the communication.
Default is "Disabled".
GS Affinity CTI Application is available
Selects the account on which CTI support is enabled.
Configures Bluetooth to power "On", "Off" or "Off & Hide Menu From LCD".
If set "Off & Hide Menu From LCD", Bluetooth will be disabled, and users will not find
Bluetooth settings on phone LCD Menu, while if set to "No", Bluetooth will be
disabled, and Bluetooth Settings menu will be available, and user can enable it. The
default setting is "On".
Enable / disable Bluetooth handsfree feature. Default setting is "Off".
Specifies the Bluetooth device name.
Network �� OpenVPN® Settings
Enables/Disables OpenVPN® feature. Default is "No".
HERE and its User Guide HERE.