Disassembling And Assembling Engine - Honda CB160 Shop Manual

10
Fig. 3. 1 Footrest arm bolts
Fig. 3. 2 Footrest pinion
Fig.
3. 3 All
wiring
Fig. 3. 4 Air cleaner connecting tub·a
3. ENGi NE
3. 1 Disassembling and assembling engine
A.
Disassembling engine
I. Close the fuel cock.
2. Remove the right and left exhaust pipe joints and
remove the four 8 X 28 bolts holding the muffler (to-
gether with the fortrest arm) and 8 X 38 bolts
holding the footrest pinion. Separate the parts
from the engine. (Refer to Fig. 3. 1 and 3. 2)
3. Remove the air cleaner cover and the tool box.
4. Remove the high tension terminals from the spark
plug and disconnect all leads. (Refer to Fig. 3. 3}
5.
Remove the Oir cleaner coupling and the carbu-
retor at the · point of the set plate stop.
(Refer
to Fig. 3. 4)