TECHNICAL SPECIFICATIONS
Technology
Detection mode
Max. detection range
Opening angle
Angular resolution
Optical characteristics
(IEC/EN 60825-1: 2014)
Supply voltage
Power consumption
Response time
Output
LED-signals
Dimensions
Colour
Tilt angles
Protection degree
Temperature range
Humidity
Vibrations
Conformity
SAFETY INSTRUCTIONS
Only trained and qualified personnel may install and setup the scanner.
The warranty is void if unauthorized repairs are made or attempted by unauthorized personnel.
BEA SA | LIEGE Science Park | ALLÉE DES NOISETIERS 5 - 4031 ANGLEUR [BELGIUM] | T +32 4 361 65 65 | F +32 4 361 28 58 | INFO@BEA.BE | WWW.BEA-SENSORS.COM
This product should be disposed of separately from unsorted municipal waste.
12
LASER scanner, time-of-flight measurement
Presence
Max. 5.5m*5.5m (4m@5% reflectivity)
90°
0.23° (400 spots within 90°)
Wavelength 905nm; output power < 0.1 mW ; CLASS 1
Wavelength 635nm; output power < 1 mW ; CLASS 2 - Visible spot
12-24V DC ± 15% (to be supplied from a SELV power source only)
≤ 2.3W, peak current: 1A
Max. 50ms + output activation delay
1 opto (galvanic isolation - polarity free)
Max. switching voltage: 42V AC/DC
Max. switching current: 100mA
1 Relay (free of potential contact)
Max. contact voltage: 42V AC/DC
Max. contact current: 1A (resistive)
Max. switching power: 30W DC/60VA AC
1 tri-colored LED: detection / output status
124mm (L) × 90mm (H) × 50mm (D) (without bracket)
Black
±3° (with bracket)
IP66 (IEC/EN 60529)
-30°C to +60°C if powered
0-95% non-condensing
< 2G
IEC/EN 60825-1; IEC/EN 61000-6-2; IEC/EN 61000-6-3
Specifications are subject to change without prior notice. All values are measured in specific conditions.