Technical Specifications - BEA IXIO-S CAN User Manual

For automatic sliding doors
Table of Contents

Advertisement

TECHNICAL SPECIFICATIONS

Supply voltage:
Power consumption:
Mounting height:
temperature range:
Degree of protection:
Noise:
Expected lifetime:
Detection mode:
technology:
Communication interface:
Norm conformity:
12 V - 30 V DC +/-10%
(to be operated from low-voltage systems with electrical separation only (SELV))
< 2.5 W
2 m to 3.5 m
(according to the applicable laws and regulations)
-25°C to +55°C; 0-95% relative humidity, non condensing
IP54
< 70 dB
20 years
Presence
typical response time: < 200 ms (max. 500 ms)
Active infrared with background analysis
Spot: 5 cm x 5 cm (typ)
Number of spots: max. 24 per curtain
Number of curtains: 2
CAN
EN 12978
EN ISO 13849-1PL «c» CAt. 2
(under the condition that the door control system monitors the sensor at least once per door cycle)
IEC 61496-1 ESPE type 2
EN 16005 Chapter 4.6.8;
DIN 18650-1 Chapter 5.7.4
BS 7036-1 Chapter 8.1
Specifications are subject to changes without prior notice.
All values measured in specific conditions and with a temperatre of 25°C.
7

Advertisement

Table of Contents
loading

Table of Contents