Table of Contents
Advertisement
User-Specified Reread Delay
If you want to set your own length for the reread delay, scan the bar code below,
then set the delay (from 0-30,000 milliseconds) by scanning digits from the inside
back cover, then scanning Save.
2D Reread Delay
Sometimes 2D bar codes can take longer to read than other bar codes. If you wish
to set a separate Reread Delay for 2D bar codes, scan one of the programming
codes that follows. 2D Reread Delay Off indicates that the time set for
Delay
42
Long (1000 ms)
is used for both 1D and 2D bar codes. Default = 2D Reread Delay Off.
* 2D Reread Delay Off
Medium (2000ms)
Extra Long (4000ms)
User-Specified Reread Delay
HF52X Fix Mount Barcode Scanner User Guide
Extra Long (2000 ms)
Reread
Short (1000ms)
Long (3000ms)
Advertisement
Table of Contents
