Codegate; Character Activation Mode - Honeywell HF52X User Manual

®

CodeGate

When CodeGate is On, the trigger is used to allow decoded data to be transmitted
to the host system. The scanner remains on, scanning and decoding bar codes, but
the bar code data is not transmitted until the trigger is pressed. When CodeGate is
Off, bar code data is transmitted when it is decoded. Default = CodeGate Off Out-of-
Stand.

Character Activation Mode

You may use a character sent from the host to trigger the scan engine to begin
scanning. When the activation character is received, the scan engine continues
scanning until either the
tion character is received (see
transmitted. Scan the following On bar code to use character activation, then use
Activation Character (following) to select the character you will send from the host
to start scanning. Default = Off.
HF52X Fix Mount Barcode Scanner User Guide
Left of
Presentation Centering
Window
* CodeGate Off
Out-of-Stand
* Off
Character Activation Timeout
Deactivation Character
Activation Character
Right of Presentation
Centering Window
CodeGate On
Out-of-Stand
(page 3-38), the deactiva-
on page 39), or a bar code is
37