Mobile Phone Read Mode
When this mode is selected, your scan engine is optimized to read bar codes from
mobile phone or other LED displays. However, the speed of scanning printed bar
codes may be slightly lower when this mode is enabled. Global shutter engines are
better for reading bar codes on cell phones and paper since there are dual expo-
sure controls to optimize the reading for each on every other frame.
Note: To turn off Mobile Phone Read Mode, scan a different Presentation Mode
configuration barcode.
Presentation Modes
Presentation Mode
Presentation Mode uses ambient light and scan engine illumination to detect bar
codes. When in Presentation Mode, the LEDs remain dim until a bar code is pre-
sented to the scan engine, then the aimer turns on and the LEDs turn up to read
the code. If the light level in the room is not high enough, Presentation Mode may
not work properly.
Scan the following bar code to program your scan engine for Presentation Mode.
32
DC active low (idle high)
Streaming Presentation -
Mobile Phone
Presentation Mode
HF52X Fix Mount Barcode Scanner User Guide
DC active high (idle low)