Table of Contents
Advertisement
UPC-A Addenda Required
When Required is scanned, the scanner will only read UPC-A bar codes that have
addenda. You must then turn on a 2 or 5 digit addenda listed on
= Not Required.
Addenda Timeout
You can set a time during which the scanner looks for an addenda. If an addenda is
not found within this time period, the data can be either transmitted or discarded,
based on the setting you are using for
the length (in milliseconds) for this timeout by scanning the bar code below, then
setting the timeout (from 0-65535 milliseconds) by scanning digits from the
Programming
UPC-A Addenda Separator
When this feature is on, there is a space between the data from the bar code and
the data from the addenda. When turned off, there is no space. Default = On.
106
Required
Chart, then scanning Save. Default = 100.
* On
UPC-A Addenda Required
Addenda Timeout
HF52X Fix Mount Barcode Scanner User Guide
* 5 Digit Addenda Off
page
105. Default
* Not Required
(page 6-106). Set
Off
Advertisement
Table of Contents
