MaxiCode Message Format
Use this setting to specify whether the secondary message of a MaxiCode bar code
is decoded or not. Default = Primary Required, Secondary if Available.
Both Primary and Secondary
MaxiCode Message Length
Scan the bar codes below to change the message length. Refer to
Description
= 1-150. Minimum Default = 1, Maximum Default = 150.
Minimum Message Length
Aztec Code
< Default All Aztec Code Settings >
Aztec Code On/Off
HF52X Fix Mount Barcode Scanner User Guide
Primary Message Only
Required
(page 80) for additional information. Minimum and Maximum lengths
* On
*Primary Required, Secondary
if Available
Message Length
Maximum Message Length
141