Table of Contents
Advertisement
If you have changed data format settings, and wish to clear all formats and return
to the factory defaults, scan the Default Data Format code below.
Add a Data Format
Step 1.
Step 2.
Step 3.
Note: 099 indicates all terminal types.
Step 4.
If you wish to create a data format for all symbologies, with the exception of some
specific symbologies, refer to B8
If you are creating a data format for Batch Mode Quantity, use 35 for the Code I.D.
Note: 99 indicates all symbologies.
Step 5.
Note: 9999 indicates all lengths.
Step 6.
60
Scan the Enter Data Format symbol
Select Primary/Alternate Format
Determine if this will be your primary data format, or one of 3 alternate
formats. This allows you to save a total of 4 different data formats. To
program your primary format, scan 0 using the
inside the back cover of this manual. If you are programming an alternate
format, scan 1, 2, or 3, depending on which alternate format you are
programming. (See "Primary/Alternate Data Formats" on page 76 for
further information.)
Terminal Type
Refer to
Terminal ID Table
for your PC. Scan three numeric bar codes on the inside back cover to
program the scan engine for your terminal ID (you must enter 3 digits).
For example, scan 0 0 3 for an AT wedge.
Code I.D.
In the
Symbology Charts,
which you want to apply the data format. Locate the Hex value for that
symbology and scan the 2 digit hex value from the
inside the back cover of this manual.
Length
Specify what length (up to 9999 characters) of data will be acceptable for
this symbology. Scan the four digit data length from the
Chart
inside the back cover of this manual. For example, 50 characters is
entered as 0050.
Editor Commands
Refer to
Data Format Editor Commands
represent the command you want to enter.
* Default Data Format
(page
(page 62) and locate the Terminal ID number
beginning on page 209, find the symbology to
(page
74).
(page 62). Scan the symbols that
HF52X Fix Mount Barcode Scanner User Guide
61).
Programming Chart
Programming Chart
Programming
Advertisement
Table of Contents
