Table of Contents
Advertisement
•
•
To Add a Prefix or Suffix:
Step 1.
Step 2.
Step 3.
Step 4.
Note: To add the Code I.D., scan 5, C, 8, 0.
To add AIM I.D., scan 5, C, 8, 1.
To add a backslash (\), scan 5, C, 5, C.
To add a backslash (\) as in Step 7, you must scan 5C twice – once to create the
leading backslash and then to create the backslash itself.
Step 5.
Step 6.
Step 7.
Repeat Steps 1-6 to add a prefix or suffix for another symbology.
Example: Add a Tab Suffix to All Symbologies
Step 1.
Step 2.
Step 3.
Scan Save, or scan Discard to exit without saving.
54
When setting up for specific symbologies (as opposed to all symbologies), the
specific symbology ID value counts as an added prefix or suffix character.
The maximum size of a prefix or suffix configuration is 200 characters, which
includes header information.
Scan the Add Prefix or Add Suffix symbol
Determine the 2 digit Hex value from the Symbology Chart (included in
the
Symbology Charts,
which you want to apply the prefix or suffix. For example, for Code 128,
Code ID is "j" and Hex ID is "6A".
Scan the 2 hex digits from the
of this manual or scan 9, 9 for all symbologies.
Determine the hex value from the
1252),
beginning on page 212, for the prefix or suffix you wish to enter.
Scan the 2 digit hex value from the
cover of this manual.
Repeat Steps 4 and 5 for every prefix or suffix character.
Scan Save to exit and save, or scan Discard to exit without saving.
Scan Add Suffix.
Scan 9, 9 from the
manual to apply this suffix to all symbologies.
Scan 0, 9 from the
manual. This corresponds with the hex value for a horizontal tab, shown
in the
ASCII Conversion Chart (Code Page 1252),
beginning on page 209) for the symbology to
Programming Chart
ASCII Conversion Chart (Code Page
Programming Chart
Programming Chart
Programming Chart
HF52X Fix Mount Barcode Scanner User Guide
(page
55).
inside the back cover
inside the back
inside the back cover of this
inside the back cover of this
beginning on page 212.
Advertisement
Table of Contents
