Setting Custom Defaults - Honeywell HF52X User Manual

Setting Custom Defaults

You have the ability to create a set of menu commands as your own, custom
defaults. To do so, scan the Set Custom Defaults bar code below before scanning
the menu commands for your custom defaults. If a menu command requires scan-
ning numeric codes from the back cover, then a Save code, that entire sequence
will be saved to your custom defaults. When you have entered all the commands
you want to save for your custom defaults, scan the Save Custom Defaults bar
code.
You may have a series of custom settings and want to correct a single setting. To do
so, just scan the new setting to overwrite the old one. For example, if you had previ-
ously saved the setting for Beeper Volume at Low to your custom defaults, and
decide you want the beeper volume set to High, just scan the Set Custom Defaults
bar code, then scan the Beeper Volume High menu code, and then Save Custom
Defaults. The rest of the custom defaults will remain, but the beeper volume setting
will be updated.
Note: Custom defaults are not applied immediately after scanning the Save Custom
Defaults bar code. To activate the custom defaults, you must read the Activate
Defaults bar code below.
4
Set Custom Defaults
HF52X Fix Mount Barcode Scanner User Guide
Save Custom Defaults