Illumination Lights; Centering - Honeywell HF52X User Manual

Illumination Lights

If you want the illumination lights on while reading a bar code, scan the Lights On
or Lights On - Mobile Phone Reading bar code, below. However, if you want to turn
just the lights off, scan the Lights Off bar code. Default = Lights On.
Note: This setting does not affect the aimer light. The aiming light can be set using

Centering

Centering
Use Centering to narrow the scan engine's field of view to make sure that when the
scanner is hand-held, it reads only those bar codes intended by the user. For
instance, if multiple codes are placed closely together, centering will insure that
only the desired codes are read.
If a bar code is not touched by a predefined window, it will not be decoded or output
by the scan engine. If centering is turned on by scanning Centering On, the scan
engine only reads codes that pass through the centering window you specify using
the Top of Centering Window and Bottom of Centering Window bar codes.
HF52X Fix Mount Barcode Scanner User Guide
(page 43).
* Lights On
Lights On - Mobile phone
Reading
Lights Off
43