Table of Contents
Advertisement
Intercharacter Delay
An intercharacter delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each character of scanned data. Scan the
Intercharacter Delay bar code below, then scan the number of 5ms delays, and
the Save bar code using the
ual.
To remove this delay, scan the Intercharacter Delay bar code, then set the number
of delays to 0. Scan the Save bar code using the
back cover of this manual.
Note: Intercharacter delays are not supported in USB serial emulation.
User Specified Intercharacter Delay
An intercharacter delay of up to 5000 milliseconds (in 5ms increments) may be
placed after the transmission of a particular character of scanned data. Scan the
Delay Length bar code below, then scan the number of 5ms delays, and the Save
bar code using the
Next, scan the Character to Trigger Delay bar code, then the 2-digit hex value for
the ASCII character that will trigger the delay
1252),
To remove this delay, scan the Delay Length bar code, and set the number of
delays to 0. Scan the Save bar code using the
cover of this manual.
HF52X Fix Mount Barcode Scanner User Guide
Programming Chart
beginning on page 212.
Delay Length
Programming Chart
Prefix
Scanned Data
1
2
3
4
Intercharacter Delay
Intercharacter Delay
inside the back cover of this manual.
ASCII Conversion Chart (Code Page
Programming Chart
inside the back cover of this man-
Suffix
5
Programming Chart
Character to Trigger Delay
inside the back
inside the
57
Advertisement
Table of Contents
