Table of Contents
Advertisement
Resetting the Custom Defaults
If you want the custom default settings restored to your scan engine, scan the Acti-
vate Defaults bar code below. This is the recommended default bar code for most
users. It resets the scan engine to the custom default settings. If there are no cus-
tom defaults, it will reset the scan engine to the factory default settings. Any set-
tings that have not been specified through the custom defaults will be defaulted to
the factory default settings.
Note: You can also use serial commands to send the list of custom defaults to your scan
engine. See
Note: To Remove custom defaults see
HF52X Fix Mount Barcode Scanner User Guide
Activate Defaults
Setting the Custom Defaults
on page 181.
Resetting the Factory Defaults
on page 176.
5
Advertisement
Table of Contents
