Data Format Non-Match Error Tone; Primary/Alternate Data Formats - Honeywell HF52X User Manual

Data Format Non-Match Error Tone

When a bar code is encountered that doesn't match your required data format, the
scan engine normally generates an error tone. However, you may want to continue
scanning bar codes without hearing the error tone. If you scan the Data Format
Non-Match Error Tone Off bar code, data that doesn't conform to your data format
is not transmitted, and no error tone will sound. If you wish to hear the error tone
when a non-matching bar code is found, scan the Data Format Non-Match Error
Tone On bar code. Default = Data Format Non-Match Error Tone On.
* Data Format Non-Match Error

Primary/Alternate Data Formats

You can save up to four data formats, and switch between these formats. Your pri-
mary data format is saved under 0. Your other three formats are saved under 1, 2,
and 3. To set your device to use one of these formats, scan one of the bar codes
below.
76
Data Format Required,
Keep Prefix/Suffix
Tone On
Primary Data Format
HF52X Fix Mount Barcode Scanner User Guide
Data Format Required,
Drop Prefix/Suffix
Data Format Non-Match
Error Tone Off
Data Format 1