Installation Manual
MMI-20039473
9
Available service port connection
Use the service port connection to download or upload data from/to the transmitter.
To access the service port, you can use commonly-available USB hardware, such as a USB
drive or USB cable.
If the transmitter is in a hazardous area, do not remove the housing cover while power
is being supplied to the unit. Removing the housing cover while power is supplied to the
unit could cause an explosion. To access the service port in a hazardous environment,
remove power from the transmitter and wait 5 minutes before removing the housing
cover.
The service port connection is located under the Service Port warning flap at the wiring
access points.
Installation Manual
DANGER
Available service port connection
May 2019
43