Operation
5
Operation
5.1
Device operation
All the functions of the device (open, close) are controlled with the valve control lever on the fork lift
truck
As long as the valve control lever is activated, the functions ("open" and "close") will take place.
Move the valve control lever slowly in the neutral position, otherwise pressure peaks could reduce the
gripping power of the device.
The best gripping power will be achieved is to hold the lever two more seconds after the gripping the pipe or
cone.
To ensure a uniform load, set the device always on the centre of the packages.
Carefully lift and put down the device (with the gripped the packages).
Avoid quick and jerky movements with the loaded device.
5.2
Hydraulically adjustable height stop
When setting the plate on the block, the adjustable height stop will slide up by moving down the gripper.
As soon as the clamp will be closed, the plate will be automatically locked through increase of pressure in
the gripping cylinder. Thus you need only one hydraulic circle.
5705.0015
V7
Hydraulically adjustable
height stop
16 / 22
GB