Table of Contents
Advertisement
Safety
2.9.2
Safety in Hydraulic pressure mode
The best gripping power will be achieved if the control lever is pressed two more seconds after the
gripping (closing action). Subsequent the control lever must be moved back in the neutral position.
This valve is adjusted and sealed by the manufacturer (for the maximum hydraulic pressure
adjustment). Do not remove the sealing without contacting the manufacturer.
2.9.3
Lifting devices and forklift trucks
The lifting device / forklift truck including truss have to be in good, safe working condition.
Only authorized and qualified persons are allowed to operate the lifting device / forklift truck.
Never exceed the maximum allowable carrying capacity/working load limit (WLL) of the lifting device /
forklift truck!
2.9.4
Overload Protection
As diverse fork lifts have different hydraulic pressures, this device is equipped with an excess pressure valve
to avoid excess pressure.
This valve is adjusted and sealed by the manufacturer.
Do not remove the sealing without contact to the manufacturer!
5705.0015
V7
8 / 22
GB
Advertisement
Table of Contents
