Maintenance and care
After 50 operasting hours
Grease all slidings at the grease nipples
with a grease gun (see arrows).
6.1.2
Hydraulic
Service interval
First inspection after
25 operating hours
All 50 operating hours
5705.0015
Maintenance work
Control and tighten all hydraulic thread joints and connection.
(The implementation is only allowed by an expert).
Tighten all hydraulic connections.
Check the hydraulic system for leaks.
Check the hydraulic oil filter, clean it if necessary (if available).
Check the hydraulic oil and replace it in accordance to the manufacturer information
(recommended hydraulic oil: HLP 46 according to DIN 51524 – 51535).
Check the hydraulic hoses for breaks and abrasion.
Only specified types of oil may be used!
V7
19 / 22
GB