Configuring The Scsi Interface With Scsiselect - Advantech PCA-6005 User Manual

level format or verify the disk media of your SCSI hard disk drives. The
following table lists the available and default settings for each SCSISelect
option.
Note: The default settings are appropriate for most
systems. Run SCSISelect if you need to
change or view current settings, or if you would
like to run the SCSI disk utilities.
SCSISelect Options
SCSI Bus Interface
Definitions:
Host Adapter SCSI
ID
SCSI Parity Checking Enable, Disabled
Host Adapter SCSI
Termination
LVD/SE Connectors
SE Connectors
Boot Device Options:
Boot SCSI ID
Boot LUN Number1
SCSI Device Configuration:
Sync Transfer Rate (MBytes/sec)
Available Settings
0-15
Automatic
Enabled
Disabled
Automatic
Low On/High On
Low Off/High Off
Low Off/High On
0-15
0-7
75
Default Setting
7
Enabled
Automatic
Automatic
0
0