5.4 Windows 9X Drivers Setup Procedure
Note 1:
Note 2:
1.
In the "Windows" screen, click on "Start" and select "Settings".
Then click on the "Control Panel" icon to select "System".
PCA-6005 User's Manual
If you are using Windows 98SE, your system
will find the LAN device "PCI Ethernet Control-
ler". You must first remove this device from your
system, and then restart your computer. Then
you will be ready to install the correct driver by
following the procedure below.
The CD-ROM drive is designated as "D"
throughout this section.
54