Table of Contents
Advertisement
BIOS Support for
Int 13
Extensions2
1 Setting is valid only if Multiple LUN Support is enabled.
2 Settings are valid only if host adapter BIOS is enabled.
6.6 Starting SCSISelect
Follow these steps to start SCSISelect:
1.
Turn on or restart your system. During the startup process, pay
careful attention to the messages that appear on your screen.
2.
When the following message appears on your screen, press the
Ctrl-A keys simultaneously (this message appearsfor only a few
seconds): Press <Ctrl><A> for SCSISelect (TM) Utility!
3.
From the menu that appears, use the arrow keys to move the cursor
to the option you want to select, then press ENTER.
Note:
Exiting SCSISelect
Follow these steps to exit SCSISelect:
1.
Press ESC until a message prompts you to exit (if you changed any
settings, you are prompted to save the changes before you exit.)
At the prompt, select YES to exit, then press any key to reboot the
puter. Any changes you made in SCSISelect take effect after the com-
puter boots.
Using SCSISelect Settings
To select an option, use the arrow keys to move the cursor to the option,
then press ENTER. In some cases, selecting an option displays another
meny. You can return to the previous menu at any time by pressing ESC.
To restore the original SCSISelect default values, press F6 from the main
SCSISelect screen
Enabled, Disabled
If you have difficulty viewing the display, press
F5 to toggle between color and monochrome
modes. (This feature maye not work on some
monitors.)
77
Enabled
com-
Advertisement
Table of Contents
