Power State Resume Control; Pm Wake Up Events - Advantech PCA-6005 User Manual

3.7.8 Power State Resume Control

This field lets you to determine the state that your computer returns after
a power failure. If sets to Off, the PC will not boot after a power failure. If
sets to On, the PC will restart after a power failure. If sets to Auto, the PC
will go back to the previous state before a power failure occurred. For
instance, if the PC is power-on when power system fails, the PC will
restart when power system is working again. If the PC is power-ff when
power system fails, the PC will not boot when power system is working
again. The Choice: Off, On, Auto.

3.7.9 PM Wake Up Events

Users can enable some system events to wake up the system.
Figure 3.6: Wake Up Events
PCA-6005 User's Manual 42