Set Length Range For Aim 128 - Newland BS80 User Manual

Set Length Range for AIM 128

The scanner can be configured to only decode AIM128 barcodes with lengths that fall between (inclusive)
the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum
lengths.
If minimum length is set to be greater than maximum length, the scanner only decodes AIM128 barcodes
with either the minimum or maximum length. If minimum length is same as maximum length, only AIM128
barcodes with that length are to be decoded.
Set the Minimum Length
Example: Set the scanner to decode AIM128 barcodes containing between 8 and 12 characters
1. Scan the Set the Minimum Length barcode.
Scan the numeric barcode "8" from the "Digit Barcodes (1D Scanner)" section in Appendix.
2.
Scan the Save barcode from the "Save/Cancel Barcodes (1D Scanner)" section in Appendix.
3.
4. Scan the Set the Maximum Length barcode.
Scan the numeric barcodes "1" and "2" from the "Digit Barcodes (1D Scanner)" section in Appendix.
5.
Scan the Save barcode from the "Save/Cancel Barcodes (1D Scanner)" section in Appendix.
6.
Set the Maximum Length
36