Aim 128; Restore Factory Defaults; Enable/Disable Aim 128; Set Code Id - Newland BS80 User Manual

AIM 128

Restore Factory Defaults

Enable/Disable AIM 128

Enable AIM 128

Set Code ID

To set the Code ID, scan the Set Code ID barcode, the numeric barcodes corresponding to the
hexadecimal value of a desired ID and the Save barcode.
Example: Set the Code ID of AIM 128 to "p" (Hex: 0x70)
1. Scan the Set Code ID barcode.
Scan the numeric barcodes "7" and "0" from the "Digit Barcodes (1D Scanner)" section in Appendix.
2.
Scan the Save barcode from the "Save/Cancel Barcodes (1D Scanner)" section in Appendix.
3.
35
Restore the Factory Defaults of AIM 128
Set Code ID
Disable AIM 128 (default)