Set Code Id - Newland BS80 User Manual

ITF-14
ITF-14 is a special kind of Interleaved 2 of 5 with a length of 14 characters and the last character as the
check character.
Restore the Factory Defaults of ITF-14
Disable ITF-14
Note: It is advisable not to enable ITF-14 and Interleaved 2 of 5 at the same time.

Set Code ID

To set the Code ID, scan the Set Code ID barcode, the numeric barcodes corresponding to the
hexadecimal value of a desired ID and the Save barcode.
Example: Set the Code ID of ITF-14 to "p" (Hex: 0x70)
1. Scan the Set Code ID barcode.
Scan the numeric barcodes "7" and "0" from the "Digit Barcodes (1D Scanner)" section in Appendix.
2.
Scan the Save barcode from the "Save/Cancel Barcodes (1D Scanner)" section in Appendix.
3.
(default)
Set Code ID
Enable ITF-14, Do Not Transmit Check Digit
Enable ITF-14, Transmit Check Digit
60