Scanning Instructions - Newland NLS-HR32-BT User Manual

Scanning Instructions

When the scanner is in the Level scan mode, you can follow the steps below to scan a barcode:
1. Press and hold the Trigger. Then the scanner will project a red aiming pattern.
2. Aim the aiming pattern across the center of barcode.
3. Release the Trigger when the aiming pattern goes off. If the barcode is decoded successfully, the scanner will emit a
good read beep and the decoded data will be sent to the Host.
Note: For barcodes of the same batch, the scanner keeps a very high success ratio in certain distance which is regarded
as the optimal scanning distance.
15