Table of Contents
Advertisement
The program setup menu contains the following items:
1. Measurement - you can review the information about the detector, which
is currently connected to the Android device, delete information about the "bound"
detector and select the text types, which will be displayed in the test selection
window.
2. Tracks - you can view or change tracks recording parameters (see
Fig. 2.71), namely:
- Enable/disable manual point recording;
- Set a time interval for automatic recording of points (minimum interval is
1 second, maximum - 1 hour);
- Set a distance, when a new point is recorded as you move (minimum
displacement distance is 50 meters, maximum - 1000 meters).
If any of these settings is unnecessary for the next track recording, it can be
disabled by removing the check mark in front of that line.
Figure 2.71 – Tracks settings
84
Advertisement
Table of Contents
