Table of Contents
Advertisement
2.5.1.2 "Selecting an object thickness"
Depending on the object of measurement selected from the list, its
recommended thickness will be set automatically. However, measurements can be
carried out on thinner objects and the objects that are not provided in the
recommended list. To do this, select a food container thickness (in centimeters)
with the help of a special scroll box (see Figure 2.8).
Depending on the selected container thickness you will see the hints as to
how accurate the final measurement results will be. For objects that are not
provided in the recommended list, you should set an object thickness less than
optimal, which will later allow setting its density (see Fig. 2.10).
Figure 2.8 – Selecting an object thickness
27
Advertisement
Table of Contents
