Table of Contents
Advertisement
After an attempt to connect with the detector, the window shown in
Figure 2.3 may appear.
The probable causes are:
а) the detector is not switched on;
b) the detector is located too far from the Android device (at a distance of
more than 3 m);
c) there are problems with a Bluetooth enabled device of the Android device
or the detector.
If you cannot isolate the possible source of a problem regarding a failed
connection to the detector, you can use another detector (should you have one). For
connecting to that detector, switch it on and tap the "Search" button (see Fig. 2.3).
Figure 2.3 - Connection to the detector failed
20
Advertisement
Table of Contents
