Rockwell Automation Allen-Bradley ControlLogix DeviceNet 1756-DNB User Manual page 59

If you have RSNetWorx for ControlNet installed on your computer
you may see the following window. Otherwise, proceed to step 4.
3. Highlight DeviceNet Configuration and click on OK.
4. Click on the Online button
A list of the available drivers in RSLinx will appear. (Your list may
appear different from that shown below, depending upon what
you have configured on your system.)
5. Select the "+" next to your ControlNet driver (AB_KTC-1 above) to
expand the tree.
6. Navigate down the tree through the backplane until you reach the
DeviceNet network on channel A of the 1756-DNB module.
Configuring DeviceNet From Another Network
on the toolbar.
Publication 1756-6.5.19 - May 2000
5-3