Rockwell Automation Allen-Bradley ControlLogix DeviceNet 1756-DNB User Manual page 25

The system you will set up is shown below:
PC running Windows
NT 4.0 with
RSNetWorx, RSLinx,
and RSLogix 5000
software.
Node 62
∗
Node 0
1756-DNB and Logix5550
Controller in ControlLogix Chassis
∗ See note below
IMPORTANT
Planning Your Configuration and Data Mapping Your Devices
1770-KFD
Communication
Module
DeviceNet Network
Each end of the DeviceNet trunk cable must be
properly terminated with a resistor. Refer to the
DeviceNet Cable Planning and Installation Manual,
publication DN-6.7.2 for information.
2-3
Series 9000
Photoelectric
Sensor
Node 9
∗
Node 7
RediSTATION
Operator Interface
Publication 1756-6.5.19 - May 2000