General Operation
◆Switching the E-bike System On/Off
Hold the on/off button to switch on E-bike system and provide the power supply for
the controller. Likewise, hold the on/off button again, the E-bike system will be switched
off .The E-bike system no longer uses the battery power.
When the E-bike system is switched off, the leakage current is less than 1 μA.
■When E-bike is not in use for 5 minutes, the E-bike system will switch off automatically.
◆Display Interface
After switching on the E-bike system, the display will show Current Speed and Trip
Distance, power, battery SOC and assist level by default.
Press the "i" button will show more riding data shown below:
Trip (km)--> ODO (km)--> Max Speed (km/h)-->AVG speed (km/h)-->Trip time (mins)
Display interface cycle